Image shown may not represent exact configuration.

Melee - Foundation Force

Le Melee est un vélo de course moderne qui incarne la philosophie de design Real-World Fast™ d'ENVE. Conçu pour l'agilité et la réactivité, avec un dégagement de pneu de 35 mm, le Melee est prêt pour les critériums et les classiques.

Un châssis ENVE est la base sur laquelle vous pouvez construire le vélo de vos rêves. Le Melee est vendu sous forme de châssis uniquement qui comprend le cadre, la fourche, le jeu de direction, la potence, le guidon et la tige de selle. Pour lancer votre construction, commencez par sélectionner la taille de votre cadre, la longueur de la potence, la largeur du guidon et le recul de la tige de selle. Si vous avez des questions concernant votre fitting,, travaillez avec votre revendeur ENVE, et utilisez le calculateur ENVE Best-Fit pour atteindre votre configuration de châssis idéale. À partir de là, associez-le à la transmission de votre choix et à votre paire de roues SES ou Foundation préférée.

Crankset

SRAM Force 2x Power Meter Crankset

SRAM Force 2x Power Meter Crankset

Measure your ride power data more accurately than ever with the Force AXS power meter. Built upon the stability and a...

Groupset

SRAM Force AXS 2x KIB

SRAM Force AXS 2x KIB

All performance, no compromises. Force AXS wins with fully wireless technology, refined ergonomics, and further AXS i...

Wheelsets

AR40

AR40

L'AR40 est la dernière née de la gamme Foundation. Doté d'une jante avant et arrière de 40mm de profondeur optimisée ...

Tires

Pneu Route SES

Pneu Route SES

Les pneus SES Road sont éprouvés en CFD et en soufflerie pour réduire la traînée, et sont fabriqués pour offrir une e...

Handlebars

Cintre Combo SES AR

Cintre Combo SES AR

L'un des cintres les plus populaires de notre gamme est désormais plus largement accessible. Le cintre combo SES AR c...

Stems

Potence de route aérodynamique IN-Route

Potence de route aérodynamique IN-Route

Pièce souvent négligée, mais importante dans sa fonction et l'intégration des composants de la transmission, la po...

Saddles

Selle ENVE x Selle Italia Boost SLR

Selle ENVE x Selle Italia Boost SLR

La SLR Boost est notre selle de choix en raison de sa conception légère et de son utilisation innovante des matériaux.

Seatposts

Tige de selle Aero

Tige de selle Aero

Conception en forme de D pour optimiser l'aérodynamisme et le conformité. Avec trois longueurs de tige et deux décala...

Handlebar Tape

Ruban de cintre

Ruban de cintre

La guidoline ENVE Bike est plus qu'un accessoire de mode. C'est un élément clé pour le confort, la confiance et le co...

Bottle Cages

Porte-bidon

Porte-bidon

Un porte-bidon léger en carbon de 19 grammes qui maintient solidement les bidons, tout en ayant la durabilité ENVE.

Build Summary

  • FrameMelee
  • CranksetSRAM Force 2x Power Meter Crankset
  • GroupsetSRAM Force AXS 2x KIB
  • WheelsetAR40
  • TiresPneu Route SES
  • HandlebarCintre Combo SES AR
  • StemPotence de route aérodynamique IN-Route
  • SaddleSelle ENVE x Selle Italia Boost SLR
  • SeatpostTige de selle Aero
  • Handlebar TapeRuban de cintre
  • Bottle CagesPorte-bidon x2
Total Price:
€9.949,00

Compare Build Kit Trims

Drivetrain
Wheelset
Tires
Handlebar
Saddle
Stem
Accessories
SRAM RED 2x Power Meter Crankset
SRAM Red 2x AXS Kit in Box
SRAM RED 2x Power Meter Crankset
SRAM Red 2x AXS Kit in Box
SRAM Force 2x Power Meter Crankset
SRAM Force AXS 2x KIB
SRAM Force 2x Power Meter Crankset
SRAM Force AXS 2x KIB
SES 4.5 Pro
SES 2.3, SES 3.4, SES 4.5, SES 6.7
SES 2.3, SES 3.4, SES 4.5, SES 6.7
AR40
Pneu Route SES
Pneu Route SES
Pneu Route SES
Pneu Route SES
CINTRE MONOBLOC SES AR IN-ROUTE , Cintre SES Aero Pro One-Piece
Cintre Combo SES AR, Cintre Aéro IN-Route, Cintre route SES AR, CINTRE COMPACT ROAD IN-ROUTE
Cintre Combo SES AR, Cintre Aéro IN-Route, Cintre route SES AR, CINTRE COMPACT ROAD IN-ROUTE
Cintre Combo SES AR, Cintre Aéro IN-Route, Cintre route SES AR, CINTRE COMPACT ROAD IN-ROUTE
Selle ENVE x Selle Italia Boost SLR
Selle ENVE x Selle Italia Boost SLR
Selle ENVE x Selle Italia Boost SLR
Selle ENVE x Selle Italia Boost SLR
N/A
Potence de route aérodynamique IN-Route, POTENCE IN-ROUTE HIGH RISE
Potence de route aérodynamique IN-Route, POTENCE IN-ROUTE HIGH RISE
Potence de route aérodynamique IN-Route, POTENCE IN-ROUTE HIGH RISE

Ruban de cintre
Porte-bidon x2

Ruban de cintre
Porte-bidon x2

Ruban de cintre
Porte-bidon x2

Ruban de cintre
Porte-bidon x2
  • Real-World Fast™ aero optimization
  • Tube shapes complement SES rim shapes
  • Max Tire Clearance: 35 mm
  • Frame Weight: 850 grams (56cm, Painted, No Hardware)

Frame Material ENVE M.O.D Carbon, 12x142 Thru-Axle, Flat Mount Disc, Threaded &47 BB, Internal Routing, Fender Compatible
Fork Material ENVE M.O.D Carbon, 12x100 Thru-Axle, Flat Mount Disc, Internal Routing, Fender Compatible
Target Application All Road / Endurance / Mixed Surface / Sportif / Fondo
Sizes (cm) 47, 50, 52, 54, 56, 58, 60
Fork Rake 55, 51, 47, 43
Frame Size/Fork Rake 47cm/55, 50cm/55, 52cm/51, 54cm/51,
56cm/47, 58cm/47, 60cm/43
Frame Weight 900g +/- 2% (Size 56, Painted, No Hardware)
Headset ENVE Integrated IS52/IS52 Internal Drop-In
Headset Bearing 1.5″ IS52 Upper and Lower
Seat Post Diameter ENVE Aero
BB Type T47 Inboard Bearing
Brake Mount Flat Mount
Front Axle 12×100 (Total Length: 122, TP:1.5, TL:15)
Rear Axle 12×142 (Total Length: 168, TP:1.0, TL:14)
Minimum Tire Size 27mm
Optimal Tire Size 31mm - 35mm
Maximum Listed Tire Clearance 1x 40mm
Maximum Listed Tire Clearance 2x 38mm
In-Frame Storage Yes (2 Storage Bags included - 18.22 cubic cm each)
Frame Routing Internal
Waterbottle Capacity 3
Top Tube Mounts Yes
Fender Compatible Yes
Wheel Size 700c

COMPONENT COMPATIBILITY
Handlebars ENVE IN-Route
Stem ENVE IN-Route
Seat Posts Aero 275mm x 0 Offset
Aero 350mm x 0 Offset
Aero 350mm x 20 Offset

DRIVETRAIN COMPATIBILITY
Shimano Mechanical 1x Yes
Shimano Mechanical 2x Yes
Shimano Electronic Di2 (1x/2x) Yes
SRAM Mechanical 1x Yes
SRAM Mechanical 2x No (Fray requires continuous housing for FD)
SRAM AXS (1x/2x) Yes
Campy Mechanical 1x Yes
Campy Mechanical 2x No (Fray requires continuous housing for FD)
Campy Electronic EPS Not Compatible

Brake Rotors
Fork
Fork is 160mm only
Frame
Rear brake/frame is 140mm or 160mm with adapter.

 

Impressive

As road racing has evolved there is constantly more and more asked of our bike frames. The Melee’s ability to run a wide range of tire widths to comfortably tackle whatever racing is on the calendar makes it the perfect road bike for how I ride.

- Alexey Vermeulen

Featured Video

REAL-WORLD FAST

Developed in CFD and the wind tunnel, the Melee features refined tube shapes that have been tuned to complement ENVE’s SES™ rim shapes and deliver aerodynamic performance that is ready to battle with the fastest bikes on the road. Full front-end integration contributes to the Melee’s slippery design.

Real-World Fast Defined:

  • Balanced for aero efficiency and weight savings
  • Tube shapes complement SES rim shapes
  • Integrated Front-End hides wires and brake
  • Wind tunnel tested for performance at 32 kph/20 mph and 48 kph/30 mph

Rider specific fit and tune

At the foundation of performance is bike fit and geometry. If those two fundamentals are not established, all the engineering wizardry and space age materials in the world won’t save your ride. You need an optimized fit and tuned geometry to give you the confidence and comfort needed to reach your performance potential.

Offered in seven sizes with five fork rakes and giving you the opportunity to choose your bar model, bar width, stem length, stem rise, seatpost length and offset, the Melee has your ideal fit in mind.

While three fork rakes handily service the bulk of riders, we’ve added two extra fork rakes to specifically accommodate the smallest and largest riders in the ENVE family. This ensures that all Melees, regardless of size, will deliver the same level of responsive, confidence inspiring handling required from a race bike.

INTEGRATED FOR SPEED

The Integrated Front-End routes wires and hoses through the bar, stem, and headset where they’re secured using ENVE’s anti-rattle frame finishing kit. This allows internally routed hoses and wires to remain silent, out of sight, and out of the wind. Featuring the two-piece Integrated Aero Stem and SES AR Handlebar, the Melee capitalizes on the conveniences of a two-piece handlebar and stem while maximizing the aerodynamic benefits of the streamlined design.

MATERIAL OPTIMIZED DESIGN (M.O.D.)

We are carbon experts, artisans of our craft, using the best material for the application and making the products that we want to ride. At ENVE, we design and build to the strengths of carbon fiber. This means running continuous fibers throughout the frame and fork, tapering the laminate, and removing excess material to save weight. Carbon fiber is layered and oriented to achieve zone-specific performance requirements like impact toughness, stiffness and compliance. M.O.D. is giving you everything you need, and nothing that you don’t to perform when the rubber hits the road.

Complete Bikes, Your Way

The Melee is available as a frameset or through our Spec’d For Speed bike build program - your gateway to building the exact bike you want. 

Spec’d for Speed opens up a range of options, allowing you to tailor every detail to your riding style. Choose your ideal handlebar model and width, dial in wheel selection, pick your preferred groupset and crank length, and fine‑tune the finishing touches that make a bike unmistakably yours. It’s the level of premium component choice you expect from ENVE, brought together in one seamless, rider‑focused experience.



You may also like


Vu récemment